The 21st century has not only come with technological advancement but also industrialization. This means the number of industries and machinery have been on the rise. This has created a boom for the lubrication companies since these machines need to be regularly lubricated. Lubricants are organic substances used to reduce friction in surfaces with mutual contact. The great demand for lubricants has also led to the rise of many types of lubricants. This has left many machinery owners stranded on which to choose and which to leave.
All lubricants are not the same, but organic lubricants will always beat them all. In this article, let us find out what makes a good organic lubricant.
Viscosity
Viscosity is the resistance created by two deforming forces. Good quality lubricants must always be sure to offer enough viscosity both at high and low temperatures. For parts moving at high speed, lubricants with a low viscosity are recommended. For parts dealing with large clearance and high loads, lubricants with high viscosity are recommended.
The viscosity of a lubricant also increases when the temperature between two contacting surfaces decreases. This explains the importance of using organic lubricants since they define and meet all these demands.
Flash and Fire Point
Flash is the minimum temperature at which a lubricant can give off enough vapor to form a flash whenever a flame is brought near its surface. On the other hand, the fire point is the lowest temperature of the lubrication oil, where it can burn continuously. The two, therefore, determines the possibility of a lubricant causing fire. A good one should have a flashpoint higher than the temperatures likely to be developed from the two contacting surfaces. This explains why organic lubricants are always the best since they have a higher flashpoint.
Volatility
This is the point at which a lubricant can lose a certain weight due to evaporation when exposed to high temperatures for long. High volatile lubricants are consumed much faster than those with lower volatility. This means lubricants with a high volatility rate need to be regularly replaced. This explains why organic lubricants are always highly sorted due to their low rate of volatility.
What Next?
Despite production facilities requiring lubricants to complete their operations, always remember not all lubricants are equal. Never make the mistake of purchasing a lubricant without considering the factors mentioned above. This is why machinery owners are advised always to choose organic lubricants since they meet all the required demands.